Continental EH030 Commercial Washer- SOLD!
Out of stock
Only $3900 CDN !!
compare to $10,567 US dollars at North Ridge Equipment
EH030 Logi 30LB E-Series OPL Soft Mount Washer-Extractor For Turnout Gear
Designed to drive down water, electrical and gas costs while improving productivity, E-Series High-Performance Washer-Extractors deliver high-speed extract, an easy-to-install freestanding design, unmatched durabilty and the ultimate in programmability! E-Series commercial washers deliver more performance using less labor, natural resources and chemicals. The E-Series front-load washer is available in 20- to 255-pound capacity models.
- Dry Weight Capacity: 30 pounds
- Width: 31.3 inches
- Depth: 34.9 inches
- Height: 52.2 inches
Featuring the Logi control system:
The highly flexible Logi Control, available on EH030 and EH040 models, offers eight individually modifiable programs—each with up to nine baths including multiple pre-wash, wash and rinse cycles. Variables within each bath—including wash temperature, water levels, cycle times, rotation and G-force extract speeds—can be individually programmed for maximum efficiency given the load type. E-Series Washers with Logi Controls can be programmed for automatic chemical injection—ensuring a consistent clean and eliminating fabric damage by chemical overuse.
E-Series Washers feature durable AISI-304 stainless steel inner and outer drums designed for constant use. The front, side and top panels are constructed of steel and coated with Continental's unique Titan Steel Finish™ for superior appearance and corrosion resistance. Each component is engineered with as few welds as possible for unmatched strength. The oversized door, which allows for easy loading and unloading, is also equipped with a heavy-duty, bolt-style hinge to withstand the rigors of constant use. From the rounded cabinet corners to the oversized bearings and quality sealing system, no details were overlooked. No wonder E-Series are backed by a solid manufacturer's warranty!
Zero-Impact Washer Installation
The freestanding design of E-Series allows for quick installation and same-day operation. Unlike hard-mount washers, there is no need to bolt E-Series Washers to concrete foundations. The machines are constructed using a Multi-Directional Springs (MDS) system that absorbs 95 percent of all vibrations during the wash process. This enables installation in unconventional locations, including laundry rooms with in-floor heat—all with little or no floor preparation or cost. Moreover, the freestanding design allows laundries to easily relocate E-Series Washers with zero impact on the facility.
E-Series commercial front-load washers quietly and gently reach extract speeds up to 405 G-force, about 280 G-force more than most hard-mount washers. The high-speed extraction removes more water from each load—reducing dry-time, operating time, utility consumption and labor expense. By cutting dry-time, damaging heat exposure and mechanical action are also reduced, resulting in less linen wear. Linen lasts longer and so do your dryers, which run fewer hours per day. E-Series front-load commercial washers make for a more efficient and productive laundry.
E-Series technology allows for superior wash quality using considerably less water than many competitive washers. E-Series are designed without a sump—a water containment area at the base of the washer. This saves up to 3 gallons of water with each fill when compared to machines equipped with an outer tub sump. Less water used equates to lower water-heating costs and reduced chemical usage. E-Series' AquaFall™ system further enhances efficiency. Water enters the washer drum via holes in the drum lifters. As the drum turns, lifters release water from above, enabling superior load saturation, chemical penetration and rinsing. Continental's AquaMixer™ system also improves wash action by mixing hot and cold water to achieve precise bath temperatures—minimizing hot water consumption.
Easy to Maintain
To reduce maintenance time and associated costs, all components requiring regular maintenance are easily accessible. The top panel of the washer can be quickly removed, the drain is easily accessible and the transmission system can be serviced by simply removing the rear panel of the washer. Bearings are lubricated for a lifetime, the poly-v belt needn't be tightened and bearings and seals are easily replaced without removing the washer drum. The machines also feature rounded corners to avoid operator bumps and bruises and to make the machine easier to clean.
- Capacity: 30 lbs
- Cylinder Diameter: 24.4 inch
- Cylinder Depth: 16.4 inch
- Cylinder Volume: 4.4 cu ft
- Net Weight: 758 lbs
- Crated Weight: 820 lbs
- Machine Width: 31.3 inch
- Machine Depth: 34.9 inch
- Machine Height: 52.5 inch
- Door Opening: 12.9 inch
- Floor to Door: 20 inch
- Shipping Dimensions (WxDxH): 32.4 x 37.2 x 58.5 inch
- Washing Speed: 46.5 rpm
- Spin Speeds: 48/100/400/600/800/1000 rpm
- G-force: 0.8/3.46/56/125/222/346
- Static Force Transmitted: 902 lbs
- Dynamic Force Transmitted: 201 lbs
- Frequency of Dynamic Force: 16.7 Hz
- Modified Energy Factor (MEF)*: 2.08
- Water Consumption Factor*: 4.68
- Drain Diameter: 3 inch
- Water Inlets: 2 @ 3/4 inch
- Recommended Water Pressure: 30-60 PSI
- Water Flow: 16 gal/min
- Total Power: 0.87 kW